Simulator Proses Pengisian dan Pemasangan Tutup Botol Terkendali PLC Berbantuan Miniatur Konveyor

  • Anang Dwi Purnomo Laboratory for Instrumentation and Automation, Bogor Ibn Khaldun University
  • Arief Goeritno Program Studi Teknik Elektro, Universitas Ibn Khaldun Bogor http://orcid.org/0000-0002-1554-0822
  • Danang Adi Nugroho PT Serena Indopangan Industri; Jalan Mohammad Ashari Nomor 35, Kelurahan Cibinong, Kecamatan Cibinong, Kabupaten Bogor 16911, Jawa Barat
Keywords: A miniature of the conveyor machine, embedded system, programmable logic controller system, simulator for the process of filling and installing bottle caps

Abstract

A miniature conveyor machine assisted by embedded systems and controlled by a programmable logic controller (PLC) has been fabricated with the operating mechanism is based on the detection of two different colors. The objectives of this research are to obtain a miniature machine is controlled by the PLC system, create a ladder diagram-based program structure, and measure the performance of the embedded system. Obtaining the machine is carried out through assembly of the conveyor frame, installation of all devices, and integrated wiring. The programming for the Omron PLC system is based on providing the CX-Programmer 64 bits, establishing algorithms and compiling ladder diagrams, and compiling and uploading processes. The performance measurement includes synchronization conditions between the simulator and the control system, observations of the readings of installed sensors for activating all devices on the output side, and observing the measurement of the filling process time and the installation of bottle caps assisted by the pneumatic system. The results of the performance during the process of filling and installing the lid obtained a success rate of 75%, based on four trials, three successes, and one failure. The general conclusion is that the embedded system that has been built can be used as a simulator for the mechanism of filling liquid into bottles and installing bottle caps, and it is as an implementation of instrumentation and automation processes.

 

Downloads

Download data is not yet available.

References

I. Chaerunnisa, S.B. Mulia, dan M. Eriyadi, (2018, Juli). Aplikasi PLC pada Alat Pengisian Air Minum Otomatis. Jurnal Elektra. [Online]. 3(2), 61-68. Tersedia di: https://pei.e-journal.id/jea/article/view/56/49.

F. Vanderweyst, “Beverage Filling System,” Canada Patent CA2510251A1, Jun. 20, 2005.

L.A. Bryan and E.A. Bryan. “Introduction to Programmable Controllers,” in Programmable Controllers: Theory and Implementation, 2nd ed., Atlanta, GA: An Industrial Text Company Publication, 1997, pp. 4-32.

E.A. Parr. "Computers and Industrial Control," in Industrial Control Handbook, 3rd ed. New York, NY: Industrial Press, Inc., 1999, p. 438.

E.A. Parr. “Programmable Controllers,” in Electrical Engineer’s Reference Handbook, Sixteenth Edition (Editors: M.A. Loughton and D.F. Warne). Burlington, MA: Newnes, 2003, pp. 16/3-16/52.

D.E. Kandray. “Introduction to Programmable Logic Controllers,” in Programmable Automation Technologies: An Introduction to CNC, Robotics, and PLCs. New York, NY: Industrial Press, Inc., 2010.pp. 1-29.

NEMA (the National Electrical Manufacturers Association). 2013. NEMA ICS 61131-1-2005 (R2013). [Online] Available: https://www.nema.org/Standards/ComplimentaryDocuments/ICS%2061131%201-2005(R2013)-contents-and-scope.pdf

W. Bolton. Programmable Logic Controllers, 6th ed. Burlington, MA: Newnes, 2015, pp. 1-19.

D. Patel. Introduction Practical PLC (Programmable Logic Controller) Programming. Munich, Grin Verlag, 2017. [Online]. Available: https://www,grin.com/document/413360.

OMRON, The CP1E Programmable Controller: Economical, Easy to Use, and Efficient, Tokyo, Japan, 2013, pp. 1-48.

F.G. Airlangga, A. Triwiyatno, dan Sumardi. (2017, Maret). Perancangan Sistem Automasi pada Pengemasan Susu Dalam Botol dengan Programmable Logic Controller (PLC) Omron CP1E terhadap Purwarupa Filling Bottle and Capping Machine. Transient. [Online]. 6(1), 103-109. Tersedia di: https://ejournal3.undip.ac.id/index.php/transient/article/view/17069.

M. Wildan, A. Goeritno, dan J. Irawan. “Embedded Device Berbasis PLC pada Miniatur Konveyor untuk Pengoperasian Simulator Rejection System,” Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi), vol. 5, no. 2, hlm. 301-311, April 2021. https://doi.org/10.29207/resti.v5i2.2994

Mitsubishi Electric, 1999. FX Series Programmable Controllers: Programming Manual. [Online] (Updated November 1999). Available:

http://dl.mitsubishielectric.com/dl/fa/document/manual/plc_fx/jy992d48301/jy992d48301j.pdf. [Accessed 30 January 2018].

S.Y. Dimpudus, V.C. Poekoel, and P.D.K. Manembu. (2015), “Sistem Pengepakan Botol Minuman Kemasan Berbasis Programmable Logic Controller,” E-Journal Teknik Elektro dan Komputer. [Online]. 4(7), 65-72. https://ejournal.unsrat.ac.id/index.php/elekdankom/article/view/10717/10305.

A. Goeritno, dan S. Pratama, “Rancang-Bangun Prototipe Sistem Kontrol Berbasis Programmable Logic Controller untuk Pengoperasian Miniatur Penyortiran Material,” Jurnal Rekayasa Elektrika, vol. 16, no. 3, hlm. 198-206, Desember 2020. http://dx.doi.org/10.17529/jre.v16i3.14905

S. Tirta, dan A. Goeritno, “Simulator Berbasis PLC untuk Pengaturan Lalu-lintas Jalan Raya pada Perlintasan Jalur Kapal,” Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi), vol. 4, no. 6, hlm. 1007-1016, Desember 2020. https://doi.org/10.29207/resti.v4i6.2668

R. Pawar, and N.R. Bhasme. (2016, June). Application of PLC’s for Automation of Processes in Industries. Int. Journal of Engineering Research and Applications (IJERA). [Online]. 6(6). 53-59. Available: https://www.ijera.com/papers/Vol6_issue6/Part%20-%203/I0606035359.pdf.

R. Langmann, and M. Stiller. (2019, September). The PLC as a Smart Service in Industry 4.0 Production Systems. Applied Science. [Online]. 9(3815), 1-22. Available: https://www.mdpi.com/2076-3417/9/18/3815/htm.

H. Carlsson, B. Svensson, F. Danielsson, and B. Lennartson, "Methods for Reliable Simulation-Based PLC Code Verification," in IEEE Transactions on Industrial Informatics, vol. 8, no. 2, pp. 267-278, May 2012, doi: 10.1109/TII.2011.2182653.

E.R. Alphonsus and M.O. Abdullah, “A review on the applications of programmable logic controllers (PLCs),” Renewable and Sustainable Energy Reviews, 60 (C), July 2016, pp. 1185-1205. https://doi.org/10.1016/j.rser.2016.01.025.

M.S. Saleh, K.G. Mohammed, Z.S. Al-sagar, and A.Z. Sameen. “Design and Implementation of PLC-Based Monitoring and Sequence Controller System,” Journal of Advanced Research in Dynamical and Control Systems, vol 10, no. 02 special issue, 2018, pp. 2281-2289.

A. Goeritno, dan Y. Herutama, “Sistem Elektronis Berbantuan PC untuk Pemantauan Kondisi Pasokan Daya Listrik,” Jurnal Rekayasa Elektrika, vol. 14, no. 2, hlm. 96-104, Agustus 2018. http://dx.doi.org/10.17529/jre.v14i2.10904

G. Gridling, and B. Weiss. Introduction to Microcontrollers, Courses 182.064 & 182.074, Embedded Computing Systems Group, Institute of Computer Engineering, Vienna University of Technology, Version 1.4 (2007 Feb. 26), pp. 11-88

Atmel. 8-bit AVR Microcontroller with 32KBytes In-System Programmable Flash. San Jose, CA: Atmel Corporation, 2011. http://www.atmel.com/Images/doc2503.pdf

M. Banzi, Getting Started with Arduino: the Open Source Electronics Prototyping Platform, 2nd ed. Sebastopol, CA: O’Reilly Media, 2011, pp. 17-24.

M. Margolis, Getting Started: Arduino Cookbook, 2nd ed. Sebastopol, CA: O’Reilly Media, Inc., 2011, pp. 1-21.

S.F. Barret, Arduino Microcontroller Processing for Everyone! 3rd ed. San Rafael, CA: Morgan & Claypool, 2013, pp.1-31. https://doi.org/10.2200/S00522ED1V01Y201307DCS043

Atmel, 8-bit AVR Microcontroller ATmega32A Datasheet. San Jose, CA: ATMEL Corporation, 2014.

http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf.

M. Banzi, and M. Shiloh, Getting Started with Arduino: the Open Source Electronics Prototyping Platform, 3rd ed. Sebastopol, CA: Maker Media, 2015, pp. 15-22.

Published
2021-08-25
How to Cite
Purnomo, A. D., Goeritno, A., & Nugroho, D. A. (2021). Simulator Proses Pengisian dan Pemasangan Tutup Botol Terkendali PLC Berbantuan Miniatur Konveyor. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 5(4), 774 - 782. https://doi.org/10.29207/resti.v5i4.3189
Section
Information Technology Articles