Implementasi Teknik Sinematografi dalam Pembuatan Film Animasi 3D Cerita Rakyat “Batu Belah Batu Betangkup”

  • Rafi Mahendra politeknik caltex riau
  • Anggy Trisnadoli Politeknik Caltex Riau
  • Erwin Setyo Nugroho Politeknik Caltex Riau
DOI: https://doi.org/10.29207/resti.v2i2.483
Keywords: Animation, Movie, Folklore, Batu Belah Batu Betangkup

Abstract

Indonesia is a country that has a variety of people's literature one of which is packed in the form of folklore. One of the folklore in Riau Province is Batu Belah Batu Betangkup. Many people who do not know how the story in detail and public interest to know the story of the people is still very lacking. Many people today especially the younger generation only know the stories and figures from films coming from abroad. To overcome the above problems, then made a folklore film that is packed in the form of 3D animation. Folklore taken is a folktale that comes from the province of Riau is the folklore of Batu Belah Batu Betangkup. 3D animation film has a duration of about 20 minutes. The technique used in this 3D animated film is Cinematographic Technique, where the technique is used to capture the image and combine the image into one so as if the image is moving. Based on the results of testing and analysis, this film managed to recapture the public interest to know the folklore, the level of public knowledge about this folklore has increased significantly. Truth stories and cinematography techniques in 3D animation has been verified by experts.

 

Downloads

Download data is not yet available.

References

[1] Santyasa, I.W.,2007. Landasan Konseptual Media Pembelajaran. Makalah disajikan dalam workshop media pembelajaran bagi guru – guru SMA Negeri Banjar Angkan, Banjar Angkan, 10 Januari 2007, Klungkung,
[2] Paramitha, A.I.,2014. Animasi 3D Kisah Ayu Intan Permani, Purwokerto: Sekolah Tinggi Manajemen Informatika dan Komputer.
[3] Miftania, A.,2012. Pembuatan Film Animasi 3D Berbasis 2D Menggunakan Cell Shading Berjudul The Postman Story. Surabaya: Sekolah Tinggi Ilmu Komputer(STIKOM)
[4] Kusuma, W.P, dan Amir Fatah Sofyan.,2013. Perancangan Film Animasi 3D Sisi dan Cangkangnya, Studi Teknik Camera Mapping. Yogyakarta: Sekolah Tinggi Manajemen Informatika dan Komputer.
[5] Wibawa, C.B.,2011. Pembuatan Film Animasi 3D Anak Berjudul “Ayo Kita Sholat”,Yogyakarta: Sekolah Tinggi Manajemen Informatika dan Komputer AMIKOM.
[6] Julianto, D, dan Dr.Intan Rizky Mutiaz,M.Ds.,2011. Perancangan Serial Animasi 3D “Steven’s Habits” sebagai media pendidikan karakter yang efektif untuk anak melalui prinsip 7 Habits, Bandung: Institut Teknologi Bandung (ITB)
[7] Wijayanto, A.,2014. Perancangan Animasi 3D Dengan Menggunakan Teknik Stop Motion Dan Particel System. Pontianak: Universitas Tanjungpura
[8] Waeo, V.,2015. Implementasi Gerakan Manusia Pada Animasi 3D Dengan Menggunakan Metode Pose to Pose. Manado: Universitas Sam Ratulangi.
[9] Affandi, U.C., dan Hari Wibawanto.,2015. Pengembangan Media Animasi Interaktif 3D Sebagai Alat Bantu Ajar Mata Pelajaran IPA Kelas VII Menggunakan Blender Game Engine. Semarang: Universitas Negeri Semarang
[10] Effendy, O.U.,1993. Televisi Siaran Teori dan Praktek, V. Bandung: PT. Citra Adutya Bakti.
[11] Yudistira, Adjie, B.,2007. 3D Studio MAX, 9.0. Jakarta: PT. Elex Media Komputindo.
[12] Kamarulzaman, A.,2005. Kamus Ilmiah Serapan. Yogyakarta: Absolut.
[13] Danandjaja, J.,1997. Folklor Indonesia: Ilmu Gosip, Dongeng, dan lain lain. Cetakan V. Jakarta: PT Pustaka Utama Grafiti
Published
2018-08-03
How to Cite
Mahendra, R., Trisnadoli, A., & Nugroho, E. S. (2018). Implementasi Teknik Sinematografi dalam Pembuatan Film Animasi 3D Cerita Rakyat “Batu Belah Batu Betangkup”. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 2(2), 578 - 583. https://doi.org/10.29207/resti.v2i2.483
Issue
Vol 2 No 2 (2018): Agustus 2018
Section
Artificial Intelligence

Copyright (c) 2018 Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright in each article belongs to the author

  1. The author acknowledges that the RESTI Journal (System Engineering and Information Technology) is the first publisher to publish with a license Creative Commons Attribution 4.0 International License.
  2. Authors can enter writing separately, arrange the non-exclusive distribution of manuscripts that have been published in this journal into other versions (eg sent to the author's institutional repository, publication in a book, etc.), by acknowledging that the manuscript has been published for the first time in the RESTI (Rekayasa Sistem dan Teknologi Informasi) journal ;