Pengembangan Embedded Device Berbasis PLC untuk Simulator Rejection System dengan Penambahan Human Machine Interface
Development of PLC-Based Embedded Device for Rejection System Simulator with the Addition of Human Machine Interface
Abstract
Changes to the simulator rejection system from the previous research were carried out by replacing all sensors, drive motors, PLC systems, and adding HMI systems. The objectives in this research, namely (i) changing and developing a rejection system simulator, creating a ladder-based program structure and configuring HMI systems and (ii) measuring the performance of the simulators. Rejection system simulator is fabricated and reassembled, ladder-based syntax into PLCs and HMI is also configured, and observing the performance is done through the HMI layer. The results of programming is carried out through (i) providing software for PLCs, (ii) programming the PLC system, (iii) compiling and uploading programs from PC to PLC, (iv) configuring PLC and HMI via ethernet, and (v) compiling and uploading the program structure from PC to HMI. The performance for observing the condition of the bottle cap through the HMI is observed when (i) synchronization between the simulator system and the HMI-assisted PLC control, (ii) the reading of the sensors installed on the simulator, and (iii) the rotation process of the rejector arm. Overall, the rejection system simulator with a PLC-based assisted by HMI can be used as a process simulation against the implementation of the rejection system
Downloads
References
M. Wildan, A. Goeritno, dan J. Irawan. (2021, April). Embedded Device Berbasis PLC pada Miniatur Konveyor untuk Pengoperasian Simulator Rejection System. Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi). 5(2), 301-311. Tersedia di: https://doi.org/10.29207/resti.v5i2.2994
OMRON, The CP1E Programmable Controller: Economical, Easy to Use, and Efficient. Tokyo, Japan: Omron, pp. 1-48, 2013.
Schneider Electric. (2020, November). Modicon M221 Logic Controller: User Guide. Scheider Electric. City of Clute, TX. [Online]. Avalaible: https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000000976.02.pdf&p_Doc_Ref=EIO0000000976
Schneider Electric. (2020, September). Easy Harmony GXU User Manual. Scheider Electric. City of Clute, TX. [Online]. Avalaible: https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000002073.03.pdf&p_Doc_Ref=EIO0000002073
T.A. Kinney. (2015, December 23). Proximity Sensors Compared: Inductive, Capacitive, Photoelectric, and Ultrasonic. Machine Design website. [Online]. Available: https://www.machinedesign.com/automation-iiot/sensors/article/21831577/proximity-sensors-compared-inductive-capacitive-photoelectric-and-ultrasonic
I. Morishita, and M. Okumura, “Automated Visual Inspection Systems for Indutrial Applications,” Measurement, vol. 1, no. 2, pp. 59-67, 1983.
S.P. Kumar, and H.V. Ramakrishna, “Automated Bottle Cap Inspection Using Machine Vision System,” International Journal of Innovative Research in Technology, vol. 2, no. 2, pp. 131-136, 2015.
S. Sridevi, P. Karthikeyan, C.A. Prakash, A. Jaganathan, and A. Mani, “Bottle Cap Inspection Based on Machine Vision,” International Journal of Engineering Research & Technology (IJERT), vol. 4, no. 26, pp. 1-4, 2016.
Prismanto, D.T. Nugroho, Y. Ramadhani, dan T. Herdantyo, “Penerapan Programmable Logic Controller Human Machine Interface Untuk Monitoring Objek pada Konveyor,” Prosiding Pengembangan Sumber Daya Perdesaan dan Kearifan Lokal Berkelanjutan, 2018, [tema: 4, energy baru dan terbarukan]
W. Bolton, Programmable Logic Controllers, 4th ed. Burlington, MA: Elsevier Newnes, pp. 1-14, 2006.
A. Goeritno, dan S. Pratama, “Rancang-Bangun Prototipe Sistem Kontrol Berbasis Programmable Logic Controller untuk Pengoperasian Miniatur Penyortiran Material. Jurnal Rekayasa Elektrika, vol. 16, no. 3, hlm. 198-206, Desember 2020. http://dx.doi.org/10.17529/jre.v16i3.14905
S. Tirta, dan A. Goeritno. (2020, Desember). Simulator Berbasis PLC untuk Pengaturan Lalu-lintas Jalan Raya pada Perlintasan Jalur Kapal. Jurnal RESTI. [Online]. 4(6), hlm. 1007-1016. Tersedia: https://doi.org/10.29207/resti.v4i6.2668
H. Carlsson, B. Svensson, F. Danielsson, and B. Lennartson, "Methods for Reliable Simulation-Based PLC Code Verification," in IEEE Transactions on Industrial Informatics, vol. 8, no. 2, pp. 267-278, May 2012, http://dx.doi: 10.1109/TII.2011.2182653
S.Y. Dimpudus, V.C. Poekoel, dan P.D.K. Manembu. (2015). Sistem Pengepakan Botol Minuman Kemasan Berbasis Programmable Logic Controller. E-Journal Teknik Elektro dan Komputer. [Online]. 4(7), hlm. 65-72. Tersedia: https://ejournal.unsrat.ac.id/index.php/elekdankom/article/view/10717/10305
R. Pawar, and N.R. Bhasme. (2016, June). Application of PLC’s for Automation of Processes in Industries. Int. Journal of Engineering Research and Applications. [Online]. 6(6), pp. 53-59. Available: https://www.ijera.com/papers/Vol6_issue6/Part%20-%203/I0606035359.pdf
E.R. Alphonsus, and M.O. Abdullah. (2016, July). A review on the applications of programmable logic controllers (PLCs). Renewable and Sustainable Energy Reviews. [Online]. 60(C), pp. 1185-1205. Available: https://doi.org/10.1016/j.rser.2016.01.025
M.S. Saleh, K.G. Mohammed, Z.S. Al-sagar, and A.Z. Sameen. “Design and Implementation of PLC-Based Monitoring and Sequence Controller System,” Journal of Advanced Research in Dynamical and Control Systems, vol 10, no. 02 special issue, pp. 2281-2289, 2018.
R. Langmann, and M. Stiller. (2019). The PLC as a Smart Service in Industry 4.0 Production Systems. Applied Science. [Online]. (3815), 1-20. Available: https://res.mdpi.com/d_attachment/applsci/applsci-09-03815/article_deploy/applsci-09-03815-v2.pdf
A. Goeritno, dan Y. Herutama, “Sistem Elektronis Berbantuan PC untuk Pemantauan Kondisi Pasokan Daya Listrik,” Jurnal Rekayasa Elektrika, vol. 14, no. 2, hlm. 96-104, 2018. http://dx.doi.org/10.17529/jre.v14i2.10904
A. Goeritno, dan I. Mustofa. (2017, Juni). Minimum System Berbasis Mikrokontroler ATmega32 untuk Pemantauan dan Tampilan Kondisi Instalasi Kelistrikan Otobis, Jurnal Ilmiah SETRUM. [Online]. 6(1), hlm.55-67. Tersedia:
https://jurnal.untirta.ac.id/index.php/jis/article/view/1721/2122
A. Goeritno, S.F. Ginting, dan R. Yatim. (2017, Juli 25). Pengoperasian Beban Listrik Fase Tunggal Terkendali melalui Minimum System Berbasis Mikrokontroler dan Sensor Voice Recognition (VR). SNATIF ke-4 tahun 2017 FT UMK. [Online]. Tersedia: https://jurnal.umk.ac.id/index.php/SNA/article/view/1244/862
A. Goeritno, Sopyandi, dan R. Yatim. (2017, Juli 25). Beban-beban Listrik Terkontrol melalui Minimum System Berbasis Payload Data Handling Berbantuan Mikrokontroler. SNATIF ke-4 tahun 2017 FT UMK. [Online]. Tersedia: https://jurnal.umk.ac.id/index.php/SNA/article/view/1270/882
M.Y. Afandi, A. Goeritno, dan R. Yatim (2017, Juli 25). Minimum System Berbasis Mikrokontroler ATmega32 Berbantuan Sensor Passive Infrared Receiver dan Fingerprint Untuk Sistem Pengamanan Kendaraan Bermotor Roda Empat atau Lebih. SNATIF ke-4 tahun 2017 FT UMK. [Online]. Tersedia: https://jurnal.umk.ac.id/index.php/SNA/article/view/1264/879
M.T. Sholehati, dan A. Goeritno, “Sistem Minimum Berbasis Mikrokontroler ATmega2560 sebagai Sistem Pengaman pada Analogi Lemari Penyimpanan Brankas,” Jurnal Rekayasa Elektrika, vol. 14, no. 3, hlm. 158-166, Desember 2018. http://dx.doi.org/10.17529/jre.v14i3.11649
A. Goeritno, dan M.Y. Afandi, “Modul Elektronika Berbasis Mikrokontroler sebagai Sistem Pengaman pada Mobil Terintegrasi dengan Engine Immobilizer,” Jurnal Rekayasa Elektrika, vol. 15, no. 2, hlm. 75-84, Agustus 2019. http://dx.doi.org/10.17529/jre.v15i2.12872
A.E.K. Pramuko, S. Asura, A. Goeritno, dan Ritzkal. (2017, Feb. 4). Pengkondisian Suhu Ruangan Berbantuan Sensor LM35 dan Passive Infrared (PIR) Berbasis Mikrokontroler Arduino Uno R3. Seminar Nasional Inovasi dan Aplikasi di Industri (SENIATI) 2017 ITN Malang. [Online]. Tersedia: http://ejournal.itn.ac.id/index.php/seniati/article/view/766
A. Goeritno, S. Asyura, Ritzkal, A.E.K. Pramuko, B.A. Prakoso, “Minimum System Berbasis Mikrokontroler Berbantuan Sensor Passive Infrared (PIR) dan Sensor Suhu LM35 Untuk Pengkondisian Suhu pada Analogi Ruangan,” di SNMI-VIII UBL, Jakarta Barat, JK, 22 April 2017, hlm. (ICT) 281-293.
F. Hendrian, Ritzkal, dan A. Goeritno, “Penggunaan Protokol Internet untuk Sistem Pemantauan pada Analogi Instalasi Listrik Fase-3 Berbantuan Mikrokontroler Arduino UNO R3 Terkendali melalui Smartphone Berbasis Android,” di Prosiding SNRT ke-2 FST-UPH, Tangerang, BT, 17-18 Mei 2017, hlm. (II) 103-110.
A. Goeritno, F. Hendrian, dan Ritzkal. (2017, Juli 25). “Lampu Pijar pada Analogi Instalasi Listrik Fase-Tiga Terkendali melalui Smartphone Berbasis Android Terhubung Internet Berbantuan Mikrokontroler,” di Prosiding SNATIF ke-4, Fakultas Teknik Universitas Muria Kudus. [Online]. Tersedia: http://jurnal.umk.ac.id/index.php/SNA/article/view/1243/861
I. Setyawibawa, dan A. Goeritno. (2019, April). Communication Interface Adapter Berbasis Mikrokontroler Arduino Terkendali Sinyal Dual Tone Multi Frequency, Jurnal ELKHA (Jurnal Teknik Elektro). [Online]. 11(1), hlm.19-26, 2019. http://dx.doi.org/10.26418/elkha.v11i1.30374
A. Goeritno, F. Hendrian, dan Ritzkal. (2019, Desember). Pengendalian Lampu Pijar pada Analogi Instalasi Listrik Fase-Tiga melalui Smartphone Berbasis Android Berbantuan Jaringan Wi-Fi. Jurnal Ilmiah SETRUM. [Online]. 8(2), hlm. 274-286. Tersedia: https://jurnal.untirta.ac.id/index.php/jis/article/view/6977/pdf_62
A.F. Nasyarudin, Ritzkal, dan A. Goeritno. (2020, October). Prototipe Perangkat untuk Pemantauan dan Pengendalian Berbasis Web Diiintegrasikan ke Smarthome System, Indonesian Journal of Electronics and Instrumentations Systems (IJEIS). [Online]. 10(2), hlm. 167-178. https://doi.org/10.22146/ijeis.58316
L. Hardian, dan A. Goeritno. (2021, Februari). Pabrikasi Unit Kontrol Berbasis Web pada Smarthome System untuk Pengoperasian Pintu Gerbang. Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi). [Online]. 5(1), hlm. 163-173. Tersedia: https://doi.org/10.29207/resti.v5i1.2879
S. Suhendri, dan A. Goeritno, “Pemantauan Energi Listrik pada Satu kWH-meter Fase Tunggal untuk Empat Kelompok Beban Berbasis Metode Payload Data Handling,” Jurnal Rekayasa Elektrika, vol. 14, no. 3, hlm. 189-197, Desember 2018. http://dx.doi.org/10.17529/jre.v14i3.11952
D. Suhartono, dan A. Goeritno. (2019, April). Prototipe Sistem Berbasis Mikrokontroler untuk Pengkondisian Suhu pada Analogi Panel dengan Analogi Sistem Air Conditioning, Jurnal EECCIS (Electrics, Electronics, Communications, Controls, Informatics, Systems). [Online]. 13(1), hlm. 22-30. Tersedia: https://jurnaleeccis.ub.ac.id/index.php/eeccis/article/download/554/345
D. Darussalam, dan A. Goeritno. (2021, April). Pemanfaatan RFID, Loadcell, dan Sensor Infrared Untuk Miniatur Penukaran Botol Plastik Bekas, Jurnal RESTI. [Online]. 5(2), hlm. 281-291. Tersedia: https://doi.org/10.29207/resti.v5i2.3048
F.G. Airlangga, A. Triwiyatno, dan Sumardi. (2017, Maret). Perancangan Sistem Automasi pada Pengemasan Susu Dalam Botol dengan Programmable Logic Controller (PLC) Omron CP1E terhadap Purwarupa Filling Bottle and Capping Machine, Transient. [Online]. 6(1), hlm. 103-109. Tersedia: https://ejournal3.undip.ac.id/index.php/transient/article/download/17069/16354
Copyright (c) 2021 Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright in each article belongs to the author
- The author acknowledges that the RESTI Journal (System Engineering and Information Technology) is the first publisher to publish with a license Creative Commons Attribution 4.0 International License.
- Authors can enter writing separately, arrange the non-exclusive distribution of manuscripts that have been published in this journal into other versions (eg sent to the author's institutional repository, publication in a book, etc.), by acknowledging that the manuscript has been published for the first time in the RESTI (Rekayasa Sistem dan Teknologi Informasi) journal ;
