Modelling Plantar Pressure in a Smart Wearable Insole System Using Piezoresistive Sensors

Authors

  • Sekhah Ulyana Telkom University
  • Husneni Mukhtar Telkom University
  • Willy Anugrah Cahyadi Telkom University
  • Nigel Bryan Tang Telkom University

DOI:

https://doi.org/10.29207/resti.v10i4.7044

Keywords:

biomechanics, gait, interpolation, plantar, pressure mapping

Abstract

Biomechanical analysis plays a crucial role in evaluating movement patterns and pressure distribution. It enables early detection of abnormal gait and posture that may lead to long-term musculoskeletal problems. By identifying pressure imbalances, biomechanical assessment supports injury prevention, rehabilitation monitoring, and personalised orthotic design. However, conventional tools are often bulky and expensive, limiting accessibility. This study introduces an insole system that integrates piezoresistive sensors with Radial Basis Function (RBF) interpolation to provide cost-effective, real-time visualisation of plantar pressure. Tests involving five subjects, conducted during standing, stair climbing, and walking, revealed distinct load patterns with a strong correlation to reference data (R² = 0.925). The static standing test demonstrated balanced pressure and an average MAPE of 24.9%, while the walking cycle exhibited consistent heel-to-toe transitions and proper weight transfer. Operating at a 10 Hz sampling rate, the wearable insole accurately quantified plantar pressure variations, demonstrating its potential for real-time gait assessment and rehabilitation monitoring.

Downloads

Download data is not yet available.

References

S. Diviya, N. Sangamitra, S. M. Venuhasini, B. S. C. Kapali, and A. Saravanan, “I.A Frame Work of a Smart Therapeutic Insole System By Measuring Plantar Pressure For Early Diagnosis Of Diabetic Foot Ulcers Using Machine Learning And Thermal Imaging Techniques,” in 2025 Eleventh International Conference on Bio Signals, Images, and Instrumentation (ICBSII), Chennai, India 2025, pp. 1–6, doi: 10.1109/ICBSII65145.2025.11013072.

I. Prasetyanto, R. A. Andriana, I. P. Pawana, D. Tinduh, H. Novida, and B. Utomo, “Insoles Reduce Peak Plantar Pressure in Diabetic Peripheral Neuropathy,” Journal of Medicinal and Pharmaceutical Chemistry Research, vol. 6, no. 5, pp. 571–580, 2024, doi: 10.48309/jmpcr.2024.432908.1072.

I. Sina et al., “Hubungan Arcus Pedis Normal Dengan Kelincahan Motorik Anak Usia Pra Sekolah Di Desa Daya Murni,” Jurnal Kedokteran dan Kesehatan-Fakultas Kedokteran Universitas Islam Sumatera Utara, vol. 22, no. 1, pp. 100–103, 2023, doi: 10.30743/ibnusina.v22i1.345.

L. Sy et al., “Estimating Lower Limb Kinematics Using a Reduced Wearable Sensor Count,” IEEE Transactions on Biomedical Engineering, vol. 68, no. 4, pp. 1293–1304, 2021, doi: 10.1109/TBME.2020.3026464.

J. Cheng et al., “Recent Progress in Flexible Wearable Sensors for Real-Time Health Monitoring: Materials, Devices, and System Integration,” Micromachines, vol. 16, no. 10, 2025, doi: 10.3390/mi16101124.

E. Montagnani, S. C. Morrison, and C. Price, “Analysis of Centre of Pressure Trajectories and Plantar Pressure Distribution to Map Development of Foot-Ground Interactions From New to Confident Walking Infants,” PLoS ONE, vol. 20, no. 4, p. e0321632, 2025, doi: 10.1371/journal.pone.0321632.

S. Simonsson, R. Tranberg, R. Zügner, and U. H. Tang, “Reliability of F-Scan® in-Shoe Plantar Pressure Measurements in People With Diabetes at Risk of Developing Foot Ulcers,” The Foot, vol. 56, p. 102027, 2023, doi: 10.1016/j.foot.2023.102027.

S. Zhao, R. Liu, C. Fei, A. W. Zia, and L. Jing, “Flexible sensor matrix film-based wearable plantar pressure force measurement and analysis system,” PLoS ONE, vol. 15, no. 8, p. e0237090, 2020, doi: 10.1371/journal.pone.0237090.

A. Fatema, I. Kuriakose, R. Gupta, and A. M. Hussain, “Analysis of Interpolation Techniques for a Flexible Sensor Mat for Plantar Pressure Measurement,” in 2023 IEEE Applied Sensing Conference (APSCON), Bengaluru, India, pp. 1–3, 2023, doi: 10.1109/APSCON56343.2023.10101098.

R. de Fazio, E. Perrone, R. Velázquez, M. De Vittorio, and P. Visconti, “Development of a Self-Powered Piezo-Resistive Smart Insole Equipped With Low-Power BLE Connectivity for Remote Gait Monitoring,” Sensors, vol. 21, no. 13, 2021, doi: 10.3390/s21134539.

V. Skala, “Multidimensional Scattered Time-Varying Scattered Data Meshless Interpolation for Sensor Networks,” in Computational Science and Its Applications – ICCSA 2023, Lecture Notes in Computer Science, vol. 13956, pp. 99–112, 2023, doi: 10.1007/978-3-031-36805-9_7.

Q. Wang et al., “A Wireless, Self-Powered Smart Insole for Gait Monitoring and Recognition via Nonlinear Synergistic Pressure Sensing,” Science Advances, vol. 11, no. 16, p. eadu1598, 2025, doi: 10.1126/sciadv.adu1598.

J. Xiang et al., “Breathable, Antibacterial, and Biocompatible Collagen Fiber Network Decorated With Zwitterionic Silver Nanoparticles for Plantar Pressure Monitoring,” ACS Applied Materials & Interfaces, vol. 14, no. 18, pp. 21645–21656, 2022, doi: 10.1021/acsami.2c01972.

X. Li et al., “Carbon Fiber-Based Smart Plantar Pressure Mapping Insole System for Remote Gait Analysis and Motion Identification,” Advanced Materials Technologies, vol. 8, no. 16, p. 2300095, 2023, doi: 10.1002/admt.202300095.

J. Lee et al., “Flexible Smart Insole and Plantar Pressure Monitoring Using Screen-Printed Nanomaterials and Piezoresistive Sensors,” ACS Applied Materials & Interfaces, vol. 17, no. 33, pp. 47153–47161, 2025, doi: 10.1021/acsami.5c08296.

H. Mukhtar et al., “Fast Algorithm to Measure the Types of Foot Postures With Anthropometric Tests Using Image Processing,” Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics (IJEEEMI), vol. 2, no. 1, pp. 48–59, 2020, doi: 10.35882/ijeeemi.v2i1.10.

T. Nagrare, P. Sindhewad, and F. Kazi, “BLE Protocol in IoT Devices and Smart Wearable Devices: Security and Privacy Threats,” arXiv, 2023, doi: 10.48550/arXiv.2301.03852.

J. Feng, L. Chen, X. Li, and J. Zhang, “Highly Sensitive Piezoresistive Sensors Based on a Voltage Divider Circuit With TFTs for Ultra-Low Pressure Detection,” IEEE Journal of the Electron Devices Society, vol. 9, pp. 623–627, 2021, doi: 10.1109/JEDS.2021.3085135.

H. A. Sitompul and T. A. Sianturi, “Interpolasi Data Berdimensi d>1 Dengan Fungsi Basis Radial (Radial Basis Function),” Jurnal Darma Agung, vol. 28, no. 1, p. 1, 2020, doi: 10.46930/ojsuda.v28i1.454.

Leanstar, “DF9-16 Thin Film Pressure Sensor Datasheet,” Sensor360, ver. 2.1, January 2019, [Online]. Available: https://www.sensor360.org/files/uploads/pdf/f887de9e48abc3ab9dc566ed2a1c39b9.pdf.

J. Jung, K. Lee, and B. Kim, “Precision Calibration and Linearity Assessment of Thin Film Force-Sensing Resistors,” Applied Sciences, vol. 14, no. 16, p. 6859, 2024, doi: 10.3390/app14166859.

J. Tao et al., “Real-Time Pressure Mapping Smart Insole System Based on a Controllable Vertical Pore Dielectric Layer,” Microsystems & Nanoengineering, vol. 6, Art. no. 62, pp. 2–10, 2020, doi: 10.1038/s41378-020-0171-1.

F. Fallahtafti, S. R. Wurdeman, and J. M. Yentes, “Sampling Rate Influences the Regularity Analysis of Temporal Domain Measures of Walking More Than Spatial Domain Measures,” Gait & Posture, vol. 88, pp. 216–220, 2021, doi: 10.1016/j.gaitpost.2021.05.031.

Y. Kobayashi and Y. Nakashima, “Estimation of Posture and Joint Angle of Human Body Using Foot Pressure Distribution: Morphological Computation with Human Foot,” ArXiv preprint, 2024, doi: 10.48550/ARXIV.2401.12464.

Q. Mei et al., “Foot Shape and Plantar Pressure Relationships in Shod and Barefoot Populations,” Biomechanics and Modeling in Mechanobiology, vol. 19, no. 4, pp. 1211–1224, 2020, doi: 10.1007/s10237-019-01255-w.

S. Iryanto, F. Muttaqien, and R. Sadikin, “Irregular Grid Interpolation Using Radial Basis Function for Large Cylindrical Volume,” Jurnal Ilmu Komputer dan Informasi, vol. 13, no. 1, pp. 17–23, 2020, doi: 10.21609/jiki.v13i1.805.

O. Barus, R. Romindo, and J. Pangaribuan, “Classification of Hearing Loss Degrees With Naive Bayes Algorithm,” Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi), vol. 7, no. 4, pp. 751–757, 2023, doi: 10.29207/resti.v7i4.4683.

O. P. Barus, F. Billie, Jusin, J. J. Pangaribuan, and A. Maulana, “Obesity Prediction: K-Nearest Neighbor vs. Support Vector Machine,” in 2024 2nd International Conference on Technology Innovation and Its Applications (ICTIIA), 2024, pp. 1–5. doi: 10.1109/ICTIIA61827.2024.10761704.

Downloads

Published

2026-07-30

Issue

Section

Computer Science Applications

How to Cite

Ulyana, S., Mukhtar, H. ., Cahyadi, W. A. ., & Tang, N. B. . (2026). Modelling Plantar Pressure in a Smart Wearable Insole System Using Piezoresistive Sensors. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 10(4), 958-970. https://doi.org/10.29207/resti.v10i4.7044