Comparative Performance of ResNet Architectures for Toraja Carving Image Classification with Data Augmentation

Authors

  • Herman Universitas Muslim Indonesia
  • Muhammand Akbar Universitas Muslim Indonesia
  • Haidawati Nasir University Kuala Lumpur
  • Herdianti Universitas Muslim Indonesia
  • Huzain Azis Universitas Muslim Indonesia
  • Lilis Nur Hayati Universitas Muslim Indonesia

DOI:

https://doi.org/10.29207/resti.v9i4.6181

Keywords:

cnn, resnet, toraja carving, clasification, data augmentation

Abstract

The complexity of the motifs and large number of different patterns make the classification of Toraja carvings challenging. The objective of this study is to develop a Convolutional Neural Network automatic classification model using a comparative analysis of the performance of three ResNet architectures. Data augmentation techniques were used to enrich the diversity of the training samples and improve the robustness of the model. The experimental results showed that ResNet101V2 had the highest validation accuracy, which was greater than 97%, followed by ResNet50V2 with more than 96%, and finally, ResNet152V2 with more than 94.74%. These test results indicate that the ResNet101V2 architecture has a better classification performance for complex motifs, with a good balance between precision and recall. However, the confusion matrix and per-class performance metrics indicated that motifs with high similarity, such as Paqdon-Bolu and Paqtedong, remained challenging. This study demonstrated that deeper CNN architectures and data augmentation techniques are effective in improving the classification accuracy of complex carving patterns. Further research should explore hybrid or advanced augmentation methods to improve the overall robustness and accuracy of the model.

Downloads

Download data is not yet available.

References

Herman, H. Nasir, M. N. Megat Mohamed Noor, T. Hasanuddin, D. Indra, and H. B. Lumentut, “Exploration of CNN Parameters to Measure Performance of LeNet-5 Architecture in Toraja Carving Classification,” in 2024 IEEE 8th International Conference on Signal and Image Processing Applications, ICSIPA 2024, Institute of Electrical and Electronics Engineers Inc., 2024. doi: 10.1109/ICSIPA62061.2024.10686353.

J. Long et al., “A Comprehensive Review of Signal Processing and Machine Learning Technologies for UHF PD Detection and Diagnosis (II): Pattern Recognition Approaches,” IEEE Access, vol. 12, pp. 29850–29890, 2024, doi: 10.1109/ACCESS.2024.3368866.

Z. Liu, H. Mao, C.-Y. Wu, C. Feichtenhofer, T. Darrell, and S. Xie, “A ConvNet for the 2020s,” in 2022 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), 2022, pp. 11966–11976. doi: 10.1109/CVPR52688.2022.01167.

M. K. Sallata, M. K. Allo, and F. Ansari, “Bamboo forest management practices and local wisdom in Tana Toraja and North Toraja Regency, South Sulawesi,” AIP Conf Proc, vol. 3001, no. 1, p. 030045, Feb. 2024, doi: 10.1063/5.0184455.

B. V. Remme’ and Y. Ba’ru, “GEOMETRIC EXPLORATION IN TORAJA CARVING,” MATEMATIKA DAN PEMBELAJARAN, vol. 8, no. 2, pp. 122–132, Dec. 2020, doi: 10.33477/mp.v8i2.1594.

X. Liu, H. Wang, Z. Li, and L. Qin, “Deep learning in ECG diagnosis: A review,” Knowl Based Syst, vol. 227, p. 107187, 2021, doi: https://doi.org/10.1016/j.knosys.2021.107187.

I. W. A. S. Darma, N. Suciati, and D. Siahaan, “Balinese Carving Recognition using Pre-Trained Convolutional Neural Network,” in ICICoS 2020 - Proceeding: 4th International Conference on Informatics and Computational Sciences, Institute of Electrical and Electronics Engineers Inc., Nov. 2020. doi: 10.1109/ICICoS51170.2020.9299021.

A. Narin, C. Kaya, and Z. Pamuk, “Automatic detection of coronavirus disease (COVID-19) using X-ray images and deep convolutional neural networks,” Pattern Analysis and Applications, vol. 24, no. 3, pp. 1207–1220, 2021, doi: 10.1007/s10044-021-00984-y.

S. R. Nayak, D. R. Nayak, U. Sinha, V. Arora, and R. B. Pachori, “Application of deep learning techniques for detection of COVID-19 cases using chest X-ray images: A comprehensive study,” Biomed Signal Process Control, vol. 64, p. 102365, 2021, doi: https://doi.org/10.1016/j.bspc.2020.102365.

J. Resti et al., “Classification of Toraja Wood Carving Motif Images Using Convolutional Neural Network (CNN) ‘Classification of Toraja Wood Carving Motif Images Using Convolutional Neural Network (CNN),’” J. RESTI (Rekayasa Sist. Teknol. Inf.), vol. 10, no. 4, pp. 486–495, 2026, doi: 10.29207/resti.v8i4.5897.

S. Anwar and N. Barnes, “Densely Residual Laplacian Super-Resolution,” IEEE Trans Pattern Anal Mach Intell, vol. 44, no. 3, pp. 1192–1204, 2022, doi: 10.1109/TPAMI.2020.3021088.

T. Lawrence, L. Zhang, C. P. Lim, and E.-J. Phillips, “Particle Swarm Optimization for Automatically Evolving Convolutional Neural Networks for Image Classification,” IEEE Access, vol. 9, pp. 14369–14386, 2021, doi: 10.1109/ACCESS.2021.3052489.

O. N. Oyelade and A. E. Ezugwu, “A novel wavelet decomposition and transformation convolutional neural network with data augmentation for breast cancer detection using digital mammogram,” Sci Rep, vol. 12, no. 1, Dec. 2022, doi: 10.1038/s41598-022-09905-3.

D. U. Sarkar and T. Prakash, “A convolutional neural network framework to design power system stabilizer for damping oscillations in multi-machine power system,” Neural Comput Appl, vol. 36, no. 9, pp. 5059–5075, 2024, doi: 10.1007/s00521-023-09323-0.

L. Malacaria, R. Bruno, G. A. Corrente, D. Armentano, E. Furia, and A. Beneduci, “Experimental insights on the coordination modes of coumarin-3-carboxilic acid towards Cr(III)-, Co(II)-, Ni(II)-, Cu(II)- and Zn(II): A detailed potentiometric and spectroscopic investigation in aqueous media,” J Mol Liq, vol. 346, p. 118302, 2022, doi: https://doi.org/10.1016/j.molliq.2021.118302.

Rubianus, “Identification of the circle concept in Toraja traditional house carving,” AIP Conf Proc, vol. 2736, no. 1, p. 110007, Sep. 2023, doi: 10.1063/5.0173924.

H. Miawarni, T. A. Sardjono, E. Setijadi, A. B. Gumelar, Wijayanti, and M. H. Purnomo, “Enhancing Classification of Elderly Fall Detection System using Tuned RBF-SVM,” in 2022 IEEE International Conference on Imaging Systems and Techniques (IST), 2022, pp. 1–5. doi: 10.1109/IST55454.2022.9827716.

R. Wang, T. Lei, R. Cui, B. Zhang, H. Meng, and A. K. Nandi, “Medical image segmentation using deep learning: A survey,” IET Image Process, vol. 16, no. 5, pp. 1243–1267, Apr. 2022, doi: 10.1049/ipr2.12419.

T. Rahman and M. S. Islam, “MRI brain tumor detection and classification using parallel deep convolutional neural networks,” Measurement: Sensors, vol. 26, p. 100694, 2023, doi: https://doi.org/10.1016/j.measen.2023.100694.

Downloads

Published

2025-08-09

Issue

Section

Artificial Intelligence

How to Cite

Herman, Akbar, M., Nasir, H., Herdianti, Azis, H., & Hayati, L. N. (2025). Comparative Performance of ResNet Architectures for Toraja Carving Image Classification with Data Augmentation. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 9(4), 737-744. https://doi.org/10.29207/resti.v9i4.6181