Software Product Line Engineering in Supply Chain Management Systems for Manufacturing Sector

Authors

  • Jehian Norman Saviero Universitas Indonesia
  • Muhammad Raihan Traveloka
  • Oman Komarudin Universitas Indonesia
  • Ade Azurat Universitas Indonesia

DOI:

https://doi.org/10.29207/resti.v9i5.5605

Keywords:

delta-oriented programming, software product line engineering, supply chain management

Abstract

Manufacturing companies are industrial enterprises that process raw materials and implement Supply Chain Management (SCM). SCM encompasses three stages: material management, planning and control, and production. While these stages are common across manufacturing companies, the workflows and strategies employed vary based on the type of goods produced. For example, one company typically approaches process orders based on requests, whereas the other processes orders based on stock availability. To address these similarities and differences, a software product line engineering (SPLE) approach can be utilized to develop SCM systems. This approach has already been proven effective in other cases, such as developing various product specifications for our Crowdfunding Application (Amanah CS UI) partner. SPLE follows the principle of mass customization, analyzing the commonalities and variabilities of the SCM system to meet diverse company needs. This approach improves the cost optimization and time efficiency in developing various SCM specifications to fulfill the requirements of each company. The development of the SCM system in this study adopts a delta-oriented programming paradigm and Abstract Behavioral Specification programming language. Subsequently, a comparison was made between the development of the SCM system using the SPLE approach and the clone-and-own approach. The research results in an enhanced SCM system developed through the SPLE, establishing it as the primary solution to existing development issues: reusing shared components and adding new custom components. Additionally, it includes an analysis that compares the SPLE approach with the clone-and-own method.

Downloads

Download data is not yet available.

Author Biographies

  • Jehian Norman Saviero, Universitas Indonesia

    Faculty of Computer Science

  • Muhammad Raihan, Traveloka

    Department of Financial Technology, Software Engineer Backend

  • Oman Komarudin, Universitas Indonesia

    Faculty of Computer Science

  • Ade Azurat, Universitas Indonesia

    Faculty of Computer Science

References

K. A. Mukhamedjanova, “Concept of supply chain management,” Journal of Critical Reviews, vol. 7, no. 2, 2020, doi: 10.31838/jcr.07.02.139.

M. Daneshvar Kakhki and V. B. Gargeya, “Role of information technology in supply chain management: A review,” Journal of Enterprise Information Management, vol. 32, no. 1, pp. 135–155, 2019.

T. Khan, M. Mehedi, and H. Emon, “Supply chain performance in the age of Industry 4.0: evidence from manufacturing sector Supply chain performance in the age of Industry 4.0: evidence from manufacturing sector Supply chain performance in the age of Industry 4.0: evidence from manufacturing sector,” 2025. [Online]. Available: https://doi.org/10.14488BJOPM.2434.2025

A. Arrumaisha, “The impact of make-to-stock and make-to-order strategy on supply chain performance,” International Journal of Supply Chain Management, vol. 9, no. 4, pp. 1036–1042, 2020.

N. R. Sanders, Supply Chain Management: A Global Perspective, 5th ed. Upper Saddle River, NJ: Pearson, 2025.

K. Pohl, G. Böckle, and F. Van Der Linden, Software product line engineering: Foundations, principles, and techniques. 2005. doi: 10.1007/3-540-28901-1.

N. Kingwijati, “Reusable feature identification in software product line engineering,” Journal of Software Engineering and Applications, vol. 13, no. 6, pp. 292–303, 2020.

I. Schaefer, L. Bettini, V. Bono, F. Damiani, and N. Tanzarella, “Delta-oriented programming of software product lines,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2010. doi: 10.1007/978-3-642-15579-6_6.

R. Hähnle, “The abstract behavioral specification language: A tutorial introduction,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2013. doi: 10.1007/978-3-642-40615-7_1.

E. B. Johnsen, R. Hähnle, J. Schäfer, R. Schlatte, and M. Steffen, “ABS: A core language for abstract behavioral specification,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2011. doi: 10.1007/978-3-642-25271-6_8.

S. Apel, D. Batory, C. Kastner, G. Saake, and I. Schaefer, “Feature-oriented software product lines: concepts and implementation,” ACM Computing Surveys (CSUR), vol. 45, no. 2, pp. 1–45, 2013.

P. Clements, “A survey of software product line practice,” Software Engineering Institute, Carnegie Mellon University, 1999.

J. R. Arnold, S. N. Chapman, L. Clive, and M. Clive, “Introduction to materials management,” Prentice-Hall, 1991.

O. Komarudin, H. Arrumaisha, and A. Azurat, “Design and Realisation of Reusable Artefacts for Internal Supply Chain Management in Manufacturing Company,” in Journal of Physics: Conference Series, 2021. doi: 10.1088/1742-6596/1811/1/012091.

O. Komarudin, D. Adianto, and A. Azurat, “Modeling requirements of multiple single products to feature model,” in Procedia Computer Science, 2019. doi: 10.1016/j.procs.2019.11.105.

M. R. A. Setyautami, R. Hähnle, R. Muschevici, and A. Azurat, “A UML profile for delta-oriented programming to support software product line engineering,” in ACM International Conference Proceeding Series, 2016. doi: 10.1145/2934466.2934479.

M. R. A. Setyautami, H. S. Fadhlillah, D. Adianto, I. Affan, and A. Azurat, “Re-Engineering Microservice Applications into Delta-Oriented Software Product Lines,” in Handbook of Re-Engineering Software Intensive Systems into Software Product Lines, Cham: Springer International Publishing, 2023, pp. 275–292. doi: 10.1007/978-3-031-11686-5_11.

M. A. Naily, M. R. A. Setyautami, R. Muschevici, and A. Azurat, “A framework for modelling variable microservices as software product lines,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2018. doi: 10.1007/978-3-319-74781-1_18.

A. Novrialdi, D. Adianto, A. Rosyida, P. L. Bagaskara, and A. Azurat, “Towards Erlang-based ABS Microservices Framework for Software Product Line Development,” Jurnal Ilmu Komputer dan Informasi, vol. 15, no. 2, 2022, doi: 10.21609/jiki.v15i2.1065.

I. Affan, A. Novrialdi, O. Komarudin, H. S. Fadhlillah, and A. Azurat, “Towards Integrated Access Control for Software Product Line Engineering Web Development,” in Lecture Notes in Networks and Systems, 2022. doi: 10.1007/978-3-030-82616-1_4.

Downloads

Published

2025-10-03

Issue

Section

Artificial Intelligence

How to Cite

Saviero, J. N., Raihan, M., Komarudin, O., & Azurat, A. (2025). Software Product Line Engineering in Supply Chain Management Systems for Manufacturing Sector. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 9(5), 1002-1012. https://doi.org/10.29207/resti.v9i5.5605