Rancang Bangun Pengukur Suhu Tubuh Dengan Multi Sensor Untuk Mencegah Penyebaran Covid-19

Helmy Yudhistira Putra; Utomo Budiyanto

doi:10.29207/resti.v5i3.2931

Helmy Yudhistira Putra Universitas Budi Luhur
Utomo Budiyanto Universitas Budi Luhur

DOI: https://doi.org/10.29207/resti.v5i3.2931

Keywords: COVID-19, Wemos D1 R2, MLX-90614, Selenoid Door Lock, COVID-19 Prevention

Abstract

During the COVID-19 pandemic, the price of preventive equipment such as masks and hand sanitizers has increased significantly. Likewise, thermometers are experiencing an increase and scarcity, this tool is also sought after by many companies for screening employees and guests before entering the building to detect body temperatures that are suspected of being positive for COVID-19. The use of a thermometer operated by humans is very risky because dealing directly with people who could be ODP (People Under Monitoring/Suscpected ) or even positive for COVID-19, therefore we need tools for automatic body temperature screening and do not involve humans for the examination. This research uses the MLX-90614 body temperature sensor equipped with an ultrasonic support sensor to detect movement and measure the distance between the forehead and the temperature sensor so that the body heat measurement works optimally, and a 16x2 LCD to display the temperature measurement results. If the measured body temperature is more than 37.5 ° C degrees Celsius then the buzzer will turn on and the selenoid door lock will not open and will send a notification to the Telegram messaging application. The final result obtained is the formation of a prototype device for measuring body temperature automatically without the need to involve humans in measuring body temperature to control people who want to enter the building so as to reduce the risk of COVID-19 transmission

Downloads

Download data is not yet available.

References

Supegina, F., & Setiawan, E. J. (2017). Rancang Bangun Iot Temperature Controller Untuk Enclosure Bts Berbasis Microcontroller Wemos Dan Android. Jurnal Teknologi Elektro, Universitas Mercu Buana, 8(2), 145–150.

Ismail, M., Prasetyowati, A. D., & Hapsari, J. P. (2019). Desain dan Implementasi Akuisisi Data Suhu Murid Sekolah Berbasis Arduino Untuk Monitoring Kesehatan Komunal. Jurnal Nasional Teknik Elektro, 8(2), 58. https://doi.org/10.25077/jnte.v8n2.640.2019

Gamal, & Shintadewi, E. (2018). Pengukur tinggi, berat, dan suhu badan berbasis Arduino Uno dan Labview. JETri, 16(1), 55–68.

Hakim, F., & Nurwarsito, H. (2019). Sistem Pemantauan Detak Jantung dan Suhu Tubuh menggunakan Protokol Komunikasi MQTT. Jurnal Pengembangan Teknologi Informasi Dan Ilmu Komputer, 3(11), 10705–10711.

Arafat. (2016). Sistem Pengamanan Pintu Rumah Berbasis Internet Of Things (IoT) Dengan ESP8266. Technologia, 7(4), 7. https://doi.org/10.1126/science.195.4279.639

Kali, M., Tarigan, J., & Louk, A. (2016). Sistem Alarm Kebakaran Menggunakan Sensor Infra Red dan Sensor Suhu Berbasis Arduino Uno. Jurnal Fisika, 1(1), 25–31.

Nusyirwan, Deny, Fahrudin, M., & Putra Perdana, P. P. (2019). Perancangan Purwarupa Pengatur Suhu Otomatis pada Inkubator Penetasan Telur Ayam Menggunakan Arduino Uno dan Sensor Suhu IC LM 35. JAST : Jurnal Aplikasi Sains Dan Teknologi, 3(1), 60. https://doi.org/10.33366/jast.v3i1.1315

Wijaya, R. A., Lestari, S. W. L. W., & Mardiono, M. (2019). Rancang Bangun Alat Monitoring Suhu dan Kelembaban Pada Alat Baby Incubator Berbasis Internet Of Things. Jurnal Teknologi, 6(1), 52. https://doi.org/10.31479/jtek.v6i1.5

Sakuro A, Susanto E, Pangaribuan P (2018), Realisasi Sistem Kendali Suhu Dan Kelembaban Pada Kabin Neonatus Penderita Hipotermia Berbasis Wireless Dan Android Realization. E-Proceeding of Engineering, 5(2), 1883–1897.

Fathulrohman, Y. N. I., & Asep Saepuloh, ST., M. K. (2018). Alat Monitoring Suhu Dan Kelembaban Menggunakan Arduino Uno. JUMANTAKA, 02(01)

H. Tang and K. Hung, "Design of a non-contact body temperature measurement system for smart campus," 2016 IEEE International Conference on Consumer Electronics-China (ICCE-China), Guangzhou, China, 2016, pp. 1-4, doi: 10.1109/ICCE-China.2016.7849773.

S. S. Vedaei et al., "COVID-SAFE: An IoT-Based System for Automated Health Monitoring and Surveillance in Post-Pandemic Life," in IEEE Access, vol. 8, pp. 188538-188551, 2020, doi: 10.1109/ACCESS.2020.3030194.

K. Baskaran, P. Baskaran, V. Rajaram and N. Kumaratharan, "IoT Based COVID Preventive System for Work Environment," 2020 Fourth International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC), Palladam, India, 2020, pp. 65-71, doi: 10.1109/I-SMAC49090.2020.9243471.

T. Mohanraj, B. Arunkumar, S. ShahulHammed and R. Santhosh, "A Review on Internet of Things (IoT) Based Pulse Rate, Blood Pressure, Body Temperature Monitoring System," 2020 Fourth International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC), Palladam, India, 2020, pp. 78-79, doi: 10.1109/I-SMAC49090.2020.9243350.